FREE MEMBERSHIP

Get your FREE Inside Composite membership

Sign me up!
Airtech Europe
Airtech Europe
Techtextil NA & TexProcess

28th January 2020, Modena, Italy

Designing complex parts not previously possible

3D printed oil pan in Windform XT 2.0, setting up phase. University of Victoria’s Formula SAE race car 2016 version. © CRP.3D printed oil pan in Windform XT 2.0, setting up phase. University of Victoria’s Formula SAE race car 2016 version. © CRP.

For the last four years of SAE competition, the UVic Formula Motorsport team has been using 3D printed oil pans that were purposely engineered to be manufactured by CRP USA's laser sintering 3d printing process and Windform TOP-LINE composite materials.       

The oil pans for the 2016, 2017 and 2018 vehicle were printed using Carbon-composite material Windform XT 2.0.

“It worked amazinglyon the 2016 and 2017 race car as the 3D printed oil pans allowed UVic team to significantly lower the engine, and thus decrease the vehicles overall centre of gravity improving the performance of the car,” the company reports.

The use of laser sintering technology also allowed UVic Formula Motorsport team to create a more complex geometry due to the ease in manufacturability. This allowed team to incorporate baffles within the pan to get rid of the possibility of oil starvation during cornering.

Oil pan CAD design. © CRP.Oil pan CAD design. © CRP.

However, during a test day with their 2018 vehicle, the engine overheated causing the oil temperature to increase beyond the limits of the designed pan. During the post inspection it was found that any thin walled surfaces deformed quiet significantly, meaning that the baffle walls of the pan were significantly warped, and one of the sections of the mating flange had been pulled into the pan creating a significant leak.

The team decided to re-evaluate all of the Windform TOP-LINE range of high-performance materials available from CRP USA for the 2019 vehicle and chose to go with Carbon-filled Windform SP composite material due to its higher melting point as compared to Windform XT 2.0.

However, to also decrease the chances of having a failure during a test day - or worse at competition - the team increased the thickness of the mating flange to allow for a large amount of surface area for an aluminum pressure flange.

To solve the problem of the baffle walls warping due to the high heat, UVic Formula Motorsport team decreased them to just one central one located around the oil pickup as well as adding a large supporting ridge, to the top of the wall to limit the need to thicken the entire wall.

The changes resulted in a more robust oil pan.

UVic Formula Motorsport team, “With laser sintering technology and Windform TOP-LINE composite materials from CRP USA at the fingertips of our engineering team, we are able to design complex parts that previously would not have been possible.

www.crp-usa.net

This article is also appears in...

Comments

Be the first to comment on Designing complex parts not previously possible

|

Back to Top