Get your FREE Inside Composite membership

Sign me up!

2nd July 2018, Newton Abbot

Composites play key role in UK’s new fusion device

Rockwood used composites to assemble the central core for the UK’s newest fusion device, Tokamak Energy’s ST40. © Rockwood Composites Rockwood Composites has used composites to assemble the central core for the UK’s newest fusion device, Tokamak Energy’s ST40. This involved application of a glass-fibre/Kapton/glass-fibre insulation layer to each of the core elements. The whole assembly was then bonded together with precise control of the bond line thickness.

The central core is made of 24 inner elements of toroidal field coils, which each needed to be insulated. This was achieved by applying a glass-fibre prepreg/Kapton/glass-fibre prepreg insulating layer to each of the core elements.

Rockwood used a silicon intensifier consolidation system to control the position and pressure during the cure. This enabled air and resin to be progressively squeezed out from under the Kapton film and ensure that the Kapton tightly bonded to the toroidal field coil to give a very uniform and consistent insulation layer.

Next challenge

The next challenge was to bond all the insulated column component together. This was achieved by using a dry glass-fibre fabric to control the bond line thickness and a dispersed adhesive system, which provided a consistent 0.1mm bonded joint. Rockwood applied the same insulation approach to the solenoid winding, which creates one of the many huge magnetic fields in ST40. Again, glass-fibre prepreg and Kapton was applied this time in a helical overlapping manner during the winding process and applied between each of the coils. Finally, the whole solenoid was overwrapped with glass prepreg.

The Newton Abbot based composites specialist developed this project from first principles, as no off-the-shelf solution was available. The company also supplied the entire cryogenic suspension system for the ST40 system, comprising a large number of bespoke carbon fibre bands. The technology is also being used in ITER, the world’s largest fusion experiment in France involving engineers and scientists from 35 countries.

Bonding large structures

Rockwood established this process as a means of bonding large structures together very accurately over large distances. It is now developing processing solutions for high temperature super conductors. “Fusion devices are built to create one of the most extreme environments you can get – more extreme temperatures than anywhere in the solar system. The properties of composites are instrumental in enabling the ST40 to achieve these extremely high temperatures – hotter than the centre of the Sun,” said Mark Crouchen, Managing Director of Rockwood Composites.

“This was a technical challenge that we relished engaging with, we knew we had the knowledge, materials and processing expertise to provide a technical and elegant solution. We’re now working with Tokamak Energy on the next stage of development.”

Innovative use of composites

“We were faced with a real problem in the manufacture of the central core of our high magnetic field tokamak. We approached Rockwood Composites and their fantastic team of engineers were able to find the best solution through an innovative use of composites. I am enjoying working with the team as we develop the technology further,” commented Graham Dunbar, ST40 Project Manager.

The ST40 is the first world-class tokamak controlled fusion device to have been designed, built and operated by a private venture. It is designed to show that fusion temperatures – 100 million degrees C – are possible in compact, cost-effective devices. This has the potential to allow fusion power to be developed for commercial deployment in years, not decades. Tokamak Energy’s aim is to put fusion power into the grid by 2030.

This article is also appears in...


Be the first to comment on Composites play key role in UK’s new fusion device


Back to Top