FREE MEMBERSHIP

Get your FREE Inside Composite membership

Sign me up!

8th September 2017, Taufkirchen

FPP-based systems on display in Stuttgart

Cevotec will present extended range of applications of Fibre Patch Placement technology at Composites Europe, which will take place from 19-21 September in Stuttgart. Besides high-volume production systems with a capacity of 100 kg per hour, a special, low-investment version for R&D departments and low-volume production is planned. Also, the processing of prepreg material is in preparation.

Following the successful market launch of the Fibre Patch Placement system Samba and the matching software Artist Studio, Cevotec has initiated the next development steps. Until now, the Samba system focused on the production of complex 3D preforms with a design space of about one cubic meter, but the attention of the Cevotec engineers is now directed to larger dimensions.

Special Samba version

"Fibre Patch Placement as a manufacturing concept is almost arbitrarily scalable," said Felix Michl, CTO of Cevotec. For high-volume production with Fibre Patch Placement technology, production cells will be able to process 15 kg of fibre material per hour. Integrated in a production line with several cells, the capacity, even while working on highly complex components, increases to more than 100 kg per hour – per request also as hybrid systems processing carbon and glass fibre simultaneously, the company explains.

Samba Fibre Patch Placement system. © Cevotec

Tailored to the requirements of development departments, research facilities and smaller serial productions, a special Samba version produces patch-based preforms in lower quantities. This is said to allow for a low-investment entry into the patch technology and enable developers to continuously work on components without occupying precious production time of a series production system.

New system type

Cevotec is also working on a new system type that will enable manufacturers to process pre-impregnated fibres such as M21 material on the basis of Fibre Patch Placement technology.

“When processing dry fibres, the patch gripper heats up the bindered patches before placing them on the mould,” explained Felix Michl. “When working with prepreg patches, the substrate or the mould is pre-heated at the position where the next patch is to be applied.”

This version of Samba is intended to primarily meet the requirements of the aerospace industry, which also benefits from the very accurate fibre positioning and the excellent mechanical properties of patch laminates.

www.cevotec.com

This article is also appears in...

Comments

Be the first to comment on FPP-based systems on display in Stuttgart

|

Back to Top